|
| Front Hub Conversion Kit |
 |
Front Hub Conversion Kit for Jeep - Converts to 5 on 4.5"
Replaces all front non-serviceable hub assemblies found on '84 and newer
Cherokees, '87 and newer Wranglers. This conversion kit improves the
vehicle's flat towing and reduces driveline wear by allowing you to
disengage the front driveline completely. WARN high strength alloy axles
help to increase front end strength and durability.
This Conversion Kit is for vehicles that retain the stock 5 on 4.5" bolt
pattern. It allows you to use WARN flange mount standard hubs on the
factory bolt pattern. Not recommended for tires larger than 32".
Note: Increases track width by 3/4" per side. Full cast rotors must be
purchased and the rotor pilot hole must be machined to 3.575 ± .015 before
installation (Full cast rotor ITT PN 65225, Wagner PN BD125039, Raybestos
PN 7142).
Warning: loss of ABS braking.
|
| Front Hub Conversion Kit '84-94 Jeep Wrangler, 5 on 4.5" wheel bolt pattern, 260X u-joint, 27 spline |
|
| Front Hub Conversion Kit '95-03 Jeep Wrangler, 5 on 4.5" wheel bolt pattern, 297X u-joint, 27 spline |
|
|
(0) Items in Cart 
